Putting on the heart rate monitor – Garmin Forerunner 410 User Manual

Page 7

Advertising
background image

Forerunner 410 Quick Start Manual

7

1. Go outdoors to an open area. For

the best reception, make sure the

antenna of the device is oriented

toward the sky.

Antenna

location

2. Touch and hold

training

to enter

training mode.

3. Stand still and do not begin

moving until the locating

satellites page disappears.

When you are receiving satellite

signals, the GPS icon appears in

the training mode pages.

Putting on the Heart

Rate Monitor

noTe: If you do not have a heart

rate monitor, you can skip this step.
Wear the heart rate monitor directly

on your skin, just below your

breastplate. It should be snug enough

to stay in place during your run.
1. Snap the heart rate monitor

module

onto the strap.

2. Wet both electrodes

on the

back of the strap to create a

strong connection between your

chest and the transmitter.

Advertising