GENIUS COLORPAGE HR6A User Manual
Page 11
Genius ColorPage-HR6A Scanner
9
Note:
If there is another USB device connected to the computer, connect the scanner to
an available USB port.
7. If you plan to connect your scanner to a USB hub
, make sure that the hub is connected to
the USB port in your computer. Next, connect the scanner to the USB hub (see Figure 4,
Step 6).
Note:
If you do not have a USB port available, you might need to buy a USB port.
When possible, we recommend using the 4 foot (1.2 meters) USB
cable provided with your scanner. If you wish to use a different
USB cable, make sure that it is a fully rated twisted-pair USB
cable and has a Type A connector at one end and a Type B plug
on the other.
1
The USB hub is not included with the scanner.
Attention
Type A Connector
Type B Connector