Setting up with a temporary usb cable – Epson Stylus NX420 User Manual
Page 7
Advertising
Installing for the First Time
7
8. Do one of the following:
■
If you selected
Temporarily connect USB cable
, continue with
“Setting Up With a Temporary USB Cable” below.
■
If you selected
Select settings using printer buttons
, continue with
“Setting Up With the Printer Buttons” on page 10.
Setting Up With a Temporary USB Cable
1. Wait while the software is installed.
2. When you see this screen, connect the printer to your computer with a USB
cable.
3. Follow any on-screen instructions to continue installing the software.
Advertising