Garmin STYLUS NX300 - Manual (Page 12)

12 Copying a Document or Photo
■ Select Paper Type and make sure Plain Paper is selected for copying
documents.
■ To change the copy quality, select Quality and choose Standard Quality ,
Best , or Draft (for plain paper only).
■ To adjust the darkness or lightness of the copy, select Copy Density and
choose a higher (darker) or lower (lighter) setting.
Note:
Not all Paper Type, Paper Size, Layout, and Quality settings may be available
depending on the options you choose.
7. After you finish selecting your settings, press OK and then Menu to exit
settings.
8. Press the x B&W or x Color button to begin copying. To cancel copying,
press y Stop/Clear Settings .
Copying a Photo
You can copy a photo onto 4 × 6-inch, 5 × 7-inch, or letter-size Epson photo
paper (various types available—see page 6) for instant photo reprints.
1. Press the P On button to turn on the NX300/305 Series.
2. Load Epson photo paper in the sheet feeder (see page 5).
3. Place your photo on the scanner glass (see page 8).
4. Press the Copy/Fax button to enter Copy mode.
5. Press u or d or use the numeric keypad to select the number of copies you
want (up to 99).
6. To change the layout, press Menu , press u or d
to select Layout , and press OK .
Press u or d to select With Border to leave a
small margin around the image or Borderless to expand the image all the
way to the edge of the paper (slight cropping may occur).
Note:
To adjust the amount of image expansion when printing borderless photos, select
Expansion and choose Standard, Medium, or Minimum.