Inserting the door panels – GE 200D8074P043 User Manual

Page 21

Advertising
background image

21

Inserting the door panels.

Consumer Support

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Attach the Top Trim on the Freezer and Fresh Food Doors.

The Top Trim can be found inside the refrigerator

compartment.

With a T-20 Torxdriver, attach the Top Trim, using two

screws on each Top Trim piece, to the top

of each door. Hand tighten only. Make sure

that the top of each panel fits snugly behind

the lip of the Top Trim.

Insert the Freezer Panel and Fresh Food Panel.

Carefully push the freezer panel in until it slides into the

slot behind the door handle. Push the filler panel

(required with some door panels) in behind the

decorator panel. Repeat for fresh food panel.

If your model has a dispenser, this step only applies to

the fresh food panel and top freezer panel.

Insert the Bottom Freezer Panel (on dispenser models).

Carefully push the panel in until it slides into the slot

behind the door handle. Push the filler panel (required

with some door panels) in behind the decorator panel.

Cut-Out

Cut-Out

Top Trim Screws

Top
Freezer
Panel

Bottom
Freezer
Panel

Side Trim

Side Trim

Fresh
Food
Panel

Read these instructions completely and carefully.

Top Trim Screws

Advertising
This manual is related to the following products: