Golden Technologies Power Lift - Manual (Page 5)

5
3. To raise the foot rest and seat, press button (S3) and hold until the
foot rest reaches the desired position. Then release the button.
4. To lower the foot rest, seat, and lift the chair, press button (S4) and hold
until the footrest closes, then release the button. If you want to lift the chair,
continue holding button until chair reaches the desired height. Then release
the button.
5. To lower the chair from a raised position, press button (S3) and hold
until the chair reaches the floor. Then release the button. If you want to raise
the footrest, continue holding the button until the footrest reaches the desired
position. Then release the button. From the lifted position you can also press
buttons (S5, S6, S8 or S9) and the chair will move to those positions.
6. To close and lift the chair from a reclined/seated position (footrest up,
back down), press button (S10). If you want to bring the chair to a seated
position, hold the button until the footrest closes, then release it. Press button
(S2) to bring the back the rest of the way up to seated position. If you want to
close and lift the chair hold down (S10) until the chair stops. The motors will
automatically shut off when the back closes and the chair reaches its highest
position.
7. Getting into your lift chair. While standing next to your chair, press button
(S10) and raise the chair to a height you can sit against. This height will vary
from person to person depending on the individual’s needs. Raise the chair
high enough so you do not have to flop down into the chair. Flopping down
into the chair will damage it and could cause personal injury. Press
button (S3). As the chair continues downward adjust yourself into a position
that is comfortable to you. Continue holding button
until chair is in the seated position (chair firmly on the
floor), then release the button. Continue operating
the chair with buttons S1 thru S9 until
you reach
your desired position.
8. Getting out of your chair. Press button (S10)
and raise the chair to a height that enables you to
easily stand. Release the button. Return the chair
to the seated position (chair firmly on the floor)
after getting out of the chair so children, pets or
obstructions do not get under the chair. Repeat
no. 7 when you want to sit down.
Note: The motors are set to shut off when they
reach their fully extended or fully retracted
position if the selected button is not released. If
you should go past your desired position, select the
button to bring you back to your desired position.
You can repeat the process as often as you like.