GE JGRS06 - Manual (Page 7)

Using the oven control.
www.GEAppliances.com
Features of Your Oven Control
BAKE Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode—you can change
the oven temperature at this point. Glows
when the oven is in bake mode.
BROIL HI/LO Pad
Touch this pad to select the broil function.
BROIL Light
Flashes while in edit mode—you can switch
from HI to LO BROIL at this point. Glows when
the oven is in broil mode.
Display
Shows the operations you have selected,
the time of day and the cooking status.
COOKING TIME Pad
Touch this pad and then touch the + or –
pad to set the amount of time you want your
food to cook. The oven will shut off when
the cooking time has run out.
DELAY START Pad
Use along with the COOKING TIME pad to set
the oven to start and stop automatically at a
time you select.
OVEN LIGHT ON/OFF Pad
Touch this pad to turn the oven light on
or off.
TIMER/CLOCK Pad
Touch this pad to select the timer feature.
Then touch + and – pads to adjust time.
To set the clock, touch this pad twice and
hold 3 seconds and then touch the + and –
pads. The time of day will flash in the display
when the oven is first turned on.
START Pad
Must be touched to start any cooking
function.
– Pad
Short taps to this pad will decrease the time
or temperature by small amounts. Touch
and hold the pad to decrease the time or
temperature by larger amounts.
+ Pad
Short taps to this pad will increase the time
or temperature by small amounts. Touch
and hold the pad to increase the time or
temperature by larger amounts.
CLEAR/OFF Pad
Touch this pad to cancel ALL oven operations
except the clock and timer.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
Touch the CLEAR/OFF pad. Allow the oven to cool for one
hour. Put the oven back into operation.
If function error code repeats, disconnect power to the
oven and call for service.
7
Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips