Grandstream Networks GXP1100/1105 User Manual
Page 18
Grandstream Networks, Inc. GXP1100/1105 User Manual Page 17 of 29
Firmware version: 1.0.1.80 Last Updated: 07/2011
Automatic Upgrade
This function is used by ITSP. End user should NOT touch these parameters.
Default is “No”. Choose “Yes” to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to “No”, the phone
will only perform HTTP upgrade and configuration check once at boot up.
Authenticate Conf File
Default is “No”. If set to “Yes”, configuration file would be authenticated before
acceptance. End user should use default setting.
Enable TR-069
Default is “No”.
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
TR-069 Username
Enter username for TR-069.
TR-069 Password
Enter password for TR-069.
Periodic Inform Enable
Enable periodic inform. Default is “No”.
Periodic Inform Interval
When enabling periodic inform, set up the periodic inform interval.
Connection Request
Username
Enter the connection request username.
Connection Request
Password
Enter the connection request password.
Authentication Method
Select the authentication method among “No authentication”, “Basic” or Digest.
Connection Request
Port
Enter the connection request port.
Offhook Auto Dial
To configure a User ID/extension to dial automatically when the phone is taken
offhook.
Syslog Server
The IP address or URL of System log server. This feature is especially useful for
ITSPs.