Grandstream Networks GXP1100/1105 - Manual (Page 9)

Grandstream Networks, Inc. GXP1100/1105 User Manual Page 8 of 29
Firmware version: 1.0.1.80 Last Updated: 07/2011
Using the GXP1100/1105
G ETTING F AMILIAR WITH THE K EYPAD
Table 7: GXP1100/1105 Keypad Buttons
Key Button Key Button Definitions
Place active call on hold
Call waiting: bring up a new line or answer the second incoming call
Transfer an active call to another number
Enter to retrieve voice mails or other messages
Programmable hard key. It can be used for Multiple Purpose Key: Speed dial, Dial DTMF
or Call Return
Mute an active call
Dial out the number and can be used as SEND or REDIAL
Adjust volume by pressing “– “or “+”
0 - 9, *, # Standard phone keypad; press # key to send call; press *** key to for IVR functions
M AKING P HONE C ALLS
2 Call Appearance with 1 SIP Account
GXP1100/1105 can support up to two lines “virtually” mapped to a SIP account. By picking up the handset,
the GXP1100/1105 will be in off-hook state and the dial tone will be heard. To make a call, dial out the
number with the current line. During the call, users can press the FLASH button to hold the current call and
make/answer another call. Users can switch the two lines by pressing the FLASH button.
Completing Calls
The GXP1100/1105 allows you to make phone calls by picking up the handset. There are four ways to
complete calls.
1. D IAL : To make a phone call.
• Take handset off hook
• The line will have a dial tone
• Enter the phone number
• Press “#” or SEND button to send
2. R EDIAL : To redial the last dialed phone number.
• Take
handset off-hook