Genie SUPERLIFT 33547 - Manual (Page 24)

22 Genie Superlift Contractor Part No. 33547
Operator's Manual First Edition • Ninth Printing
Transport and Lifting Instructions
Observe and Obey:
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for
machine weight.
The machine must be secured to the transport
vehicle with chains or straps of ample load
capacity.
Loading the Machine
Be sure to remove the load handling attachment
from the machine and place the stabilizers in the
stored position.
1 Fully lower the carriage, to lock for transport.
2 Rotate the carriage hold-down bar over the
carriage.
3 Raise the carriage until it contacts the carriage
hold-down bar.
4 Adjust the loading wheels to the desired
position. Be sure the pin is properly inserted.
Loading Machine with a Crane
Be sure to place the legs and stabilizers in the
stored position.
Be sure to inspect the machine
and remove any loose or
unsecured items.
Use the lifting bracket on the top
of the rear mast column.
Always place the lifting hook
through the lifting bracket so that
it points away from the machine.
5 Lock the rear base casters.
6 Place the machine against the vehicle. Use
proper lifting techniques to load the machine
into the transport vehicle. Be sure to check that
the carriage is locked in the lowered position.
7 Use a minimum of 1 chain or strap to secure the
machine to the truckbed. Place the chain or
strap over the mast. Placing the chain or strap
over the legs can damage the legs.
8 To unload, follow the loading instructions in
reverse order.