Garmin GPSMAP 400 User Manual

Page 75

Advertising
background image

GPSMAP 400/500 Series Owner’s Manual



Appendix

dSC Position Report Received from—shows the MMSI or name

associated with an MMSI.
database Error—internal problem with the unit. Contact your

dealer or Garmin Product Support to have the unit serviced.
deep water alarm—the Deep Water Alarm depth has been

reached.
directory item with This MMSi already Exists—the MMSI

number is already in the DSC directory. Use a different number.
directory Memory is full, Can’t Create Entry—the DSC

directory has reached the maximum of 100 contacts. Delete

unneeded contacts to add new ones.
distress Call—a DSC distress call has been received. Take

appropriate action.
Entering (Leaving) target water temperature—the target water

temperature is 2°F (1.1°C) above or below the temperature specified

by the Water Temperature Alarm. These messages appear when you

enter or leave that zone.
Entering Safe Region—the boat is approaching a safe region as

defined by your configuration settings.
Entering Unsafe Region—the boat is approaching an unsafe region

as defined by your configuration settings.

fish alarm—a beep sounds (if enabled) when a fish is detected.

This alarm does not show a message banner.
invalid MMSi—enter a valid MMSI.
Lost Satellite Reception—the unit has lost satellite signals. Check

antenna connections or try moving to a location with a clear view of

the sky.
NMEa depth is below Transducer—you must enter an

appropriate Keel Offset for the transducer (

page 53

).

No waypoints/Routes/Tracks/User waypoints found—attempted

to transfer user data from an SD card that does not contain the

specified type of data. Make sure there is data to transfer on the SD

card.
Off Course alarm—you are off course the distance set in the “Off

Course” alarm.
Route already Exists—you entered a route name that already exists

in memory. Modify the route name or delete the previous route

name.
Route is full—you attempted to add more than 250 points to a

route. Reduce the number of points or create a second route.
Route Truncated—an uploaded route from another device has more

than 250 waypoints and was truncated to fit.

Advertising
This manual is related to the following products: