Garmin GPSMAP 400 - Manual (Page 29)

GPSMAP 400/500 Series Owner’s Manual 2
Where To?
Where To?
Use the where To? option on the Home screen to search for, and
navigate to, waypoints, routes, tracks, and services such as nearby
fuel, repairs, and ramps.
NOTE: You must create waypoints and routes before you can
navigate to them.
You can navigate to a destination using one of three methods: go
To, Route To, or guide To.
go To—takes you directly to the destination.
Route To—creates a route from your location to a destination,
allowing you to add turns to the route.
guide To—uses BlueChart g2 Vision chart data to suggest the
best path to your destination. You must be using a BlueChart g2
Vision SD card for this option to appear.
 CAUTION
guide To does not ensure obstacle and bottom clearance. For safety,
always resolve any discrepancies or questions before continuing
navigation.
•
•
•
Navigating to a Destination
You can search for, and navigate to, waypoints, routes, tracks, and
services such as nearby fuel, repairs, and ramps.
To begin navigating:
1. From the Home screen, select Where To? .
2. Select the category to which you want to navigate.