Garmin GPSMAP 400 - Manual (Page 31)

GPSMAP 400/500 Series Owner’s Manual 25
Where To?
Creating and Using Waypoints
You can store up to 3,000 waypoints with a user-defined name,
symbol, depth, water temperature, and comment for each waypoint.
To create a new waypoint:
1. From the Home screen, select Charts > Navigation Chart >
MENU > Waypoints & Tracks > New Waypoint .
OR
From the Home screen, select Information > User Data >
Waypoints > Options > New Waypoint .
2. Create a waypoint using one of the following:
Enter Coordinates—enter the grid coordinates of the new
waypoint.
Use Chart—use the Rocker to move the pointer to the
location where you want create the waypoint. Press SELECT .
Use Current Position—Create a waypoint at your current
location.
To mark your current location as a waypoint:
From any screen, press the MARK key.
Edit Waypoint—designate a specific name, symbol, water
depth, or water temperature.
Delete—deletes the waypoint.
Man Overboard—designates the current location as a Man
Overboard location.
•
•
•
•
•
•
Right or Left Arrow—switches between waypoint information
and the Navigation chart.
NOTE: Selecting MaRK creates a waypoint only at your present
location.
To edit an existing waypoint:
1. From the Navigation chart, use the map pointer ( ) to highlight
the waypoint on the Navigation chart.
OR
From the Home screen, select Information > User Data >
Waypoints .
2. Select the waypoint you want to edit.
3. Select
Edit Waypoint .
4. Select the waypoint attribute you want to change ( Name ,
Symbol , Depth , Water Temp , Comment , or Position ).
To move the waypoint on the Navigation chart:
1. Select the waypoint on the Navigation chart.
2. Select
Review . (The Review button is only shown when more
than one waypoint is in the vicinity.)
3. Select the button for the waypoint you want to edit.
4. Select
Move .
5. Press SELECT to save the new location, or press MENU to
cancel the move.
•