Goldmund 19 - Manual (Page 36)

O P E R AT I N G T H E E I D O S 1 9
T H E A U D I O S E T T I N G S M E N U
C HANNEL L EVEL
• Default setting: Fix
This setting allows you to set the level of each channel sent to the 6 channel analog outputs.
1. Press SETUP and select ‘Audio Settings’ from the on-screen display
2. Highlight Channel Level, then use the cursor left/right to change to ‘Fix’ or ‘Variable’,
as required.
• Fix – Channel levels are fixed
• Variable – You can specify variable channel levels
3. If you chose Variable, press (cursor down) to proceed to the next screen.
4. Variable setting only: Set the channel levels for each speaker.
• Use the cursor up/down to select a speaker.
• Use the cursor left/right to adjust the channel level for that speaker.
Channel levels can be set from –6 dB to +6 dB. in 0.5 dB increments.
5. Press ENTER to make the settings and exit the audio settings screen.
3
3.7
Note: You can’t adjust the channel level for any
speakers that are set to Off in the Speaker
Installation menu screen.
- The Fix setting is equivalent to setting all the
channel levels to +6 dB.
Therefore, the Variable setting will usually sound
quieter than the Fix setting.
P 33 | User manual - GOLDMUND EIDOS 19 Universal Player