Goldmund 19 User Manual
Page 37
O P E R AT I N G T H E E I D O S 1 9
T H E V I D E O S E T T I N G S M E N U
V
IDEO
A
DJUST
• Default setting:
Standard
From the Video Adjust screen you can select the standard video presentation or define presets
of your own.
1.
Press SETUP and select ‘Video Adjust’ from the on-screen display.
2.
Use the cursor left/right to select a preset.
• Standard – Normal
•
Memory 1–2 – Use for making your own presets (see below)
3.
Press ENTER to make the setting and exit the Video Adjust screen.
C
REATING
Y
OUR
O
WN
P
RESETS
1.
Select one of the Memory presets (see above).
2.
Press (cursor down) to select ‘Detailed Settings’ then press ENTER.
3.
Adjust the picture quality settings.
• Use the cursor up/down to select a setting.
• Use the cursor left/right to adjust the current setting.
• Press
DISPLAY to switch between full and single view.
• You can change the preset number from the
Recall Settings menu item.
You can adjust any or all of the following picture quality settings:
•
Fine Focus – Switch On to reveal greater detail (high resolution) in the picture.
•
Contrast – Adjusts the contrast between light and dark elements in the picture.
•
Sharpness – Adjusts the sharpness of the mid-frequency (less detailed) elements in the
picture. (This setting is only effective when
Fine Focus is On)
•
Chroma Level – Adjusts how saturated colours appear.
•
Hue – Adjusts the overall colour balance between red and green. (This is only effective when
the player is connected using the
S-VIDEO OUT connector.)
4.
Press ENTER to save the preset and exit the Video Adjust screen.
3
3.8
Note: Depending on the disc and the TV/monitor,
you may not see the effect clearly.
User manual - GOLDMUND EIDOS 19 Universal Player |
P 34