GE 106820 - Manual (Page 3)

3
1. Spray/Blast Buttons (see inset)
2. Adjustable Steam Switch (see inset)
3. Water Tank Opening
4. Spray Nozzle
5. Water Window
6. Temperature Control Dial
7, Soleplate
8. Power ON/Auto Shutoff Reset
Button/Light
9. Heel Rest
10. Cord
11. Cord Release Button
(on select models)
12. Retractable Cord
(on select models)
• Steam vents should be cleaned before first use.
• During the first use of the iron, it may appear to smoke. This will stop and does not
indicate a defect or hazard.
• To clean steam vents before first use, prepare iron for steam ironing, then iron over
an old cloth for a few minutes while letting the iron steam. Press the Blast button
several times to clean the vents. Then follow the Self-Cleaning instructions.
• Many irons spit or sputter during the first few uses with tap water. This happens as the
steam chamber becomes conditioned. This will stop after a few uses.
Blast Spray
BEFORE FIRST USE
PARTS AND FEATURES
2
3
4
5 6 7
8
9
1
10
1
2
11
12
840146200 Ev00 1/23/06 1:58 PM Page 3