Gefen EXT-COMPAUD-44424 User Manual
Page 8
5
How to Connect the 4x4 Component w/Audio Matrix
1. Connect up to 4 component video/audio sources to the 4x4 Component w/
Audio Matrix inputs using the supplied 5 RCA analog stereo audio cable
Optionally, connect digital coaxial audio to the 4x4 Component w/Audio
Matrix using a user supplied digital coaxial cable.
2. Connect up to 4 component video displays to the 4x4 Component w/Audio
Matrix outputs using user supplied component cables.
3. Connect analog/digital audio outputs on the 4x4 Component w/Audio Matrix
to either the component displays or a separate audio receiver.
4. Connect the included 24V DC power supply to the 4x4 Component w/Audio
Matrix.
How to Connect the 4x4 Component w/Audio Matrix
Routing of video to displays is done using either the included RMT-16-IR
remote control or the direct select buttons located on the front panel of the 4x4
Component w/Audio Matrix.
Using the RMT-16-IR remote control
The RMT-16-IR remote control uses 16 buttons to select 1 of 4 sources for each
display to view. Each output display has a grouping of 4 buttons allocated for
selecting each source. Use the chart below to route video to your desired display.
Using the Direct Source Buttons
Each display output on the 4x4 Component w/Audio Matrix has a push-button
located on the front panel. Pressing this button will cycle through the 4 source
inputs. Press the button for each display repeatedly to select the desired source
for viewing on that display.
RMT-16-IR
Button
Source
Display
1
1
1
2
2
1
3
3
1
4
4
1
5
1
2
6
2
2
7
3
2
8
4
2
RMT-16-IR
Button
Source
Display
9
1
3
10
2
3
11
3
3
12
4
3
13
1
4
14
2
4
15
3
4
16
4
4
CONNECTING AND OPERATING THE 4X4 COMPONENT W/AUDIO MATRIX