GoVideo DVP855 - Manual (Page 13)

24
Programming in a specific order
1 Press PROGRAM button.
1
NOTE
Instructions on using the number buttons
ex) Inputting track number 25
Press " 2 " and then " 5 " within 2 seconds.
For discs that contain less than 25 tracks,
pressing " 2 " " 5 " within 2 seconds will
input track 2 and track 5.
ex) Inputting track numbers 2 and 5
Press " 2 " and then " 5 " after 2 seconds.
Press the track number using the number
buttons.
Press ENTER button.
Pressing play button afterwards plays
back according to the program.
A total of 99 songs can be programmed.
This function is activated for only CD/VCD
playback.
For a VCD version 2.0, this function works only
when the PBC is turned off.
Music can be played in a specific order.
Programming is only possible at stop mode.
Deleting a program
Pressing STOP button during playback of a
programmed song will erase that song from the
program.
Pressing CLEAR while programming will delete
a song from the program in the reverse order
which songs were selected.
Pressing STOP button while programming
will erase the whole program.
PROGRAM P00 : 00
Operation
Use ( ) buttons to move to the desired
location.
Perss "Enter" button where you want to mark.
You can bookmark up to three scenes.
Use ( ) buttons to the marked scenes. And
press PLAY button on the scene you want.
Press CLEAR button if you want to delete a
marked scene.
Viewing from another angle
having scenes
23
NOTE
This function does not work in a disc which
contains multiple camera angles.