GE GFK-0726B - Manual (Page 15)

2
2-3 GFK-0726B Chapter 2 Installation and Maintenance
Battery
The State Logic Processor comes with a 3 volt lithium battery (IC697ACC701) to maintain
memory through a power cycle. If the battery charge becomes low, a fault is set in the
fault table. These faults can be monitored by the State Logic program.
To replace the battery, connect the new battery to the extra set of battery connections
then disconnect the old battery. A Product Safety Data Sheet for the battery is available.
Order from GE Fanuc using number GFK-0633.