Garmin montana 600 - Manual (Page 8)

Getting Started
4 Montana 600 Series Owner’s Manual
Installing AA Batteries
Instead of the lithium-ion battery pack,
you can use alkaline, NiMH, or lithium
batteries. This is especially useful
when you are on the trail and cannot
charge the lithium-ion battery pack.
Use NiMH or lithium batteries for best
results.
1. Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2. Insert three AA batteries, observing
polarity.
3. Replace the battery cover, and turn
the D-ring clockwise.
4. Hold ( page 1 ).
5. Select > Setup > System > AA
Battery Type.
6. Select Alkaline, Lithium, or
Rechargeable NiMH.
Turning the Device On or
Off
Hold ( page 1 ).
Satellite Signals
After the device is turned on, it begins
acquiring satellite signals. The device
may need a clear view of the sky to
acquire satellite signals. When the
bars turn green, your device has
acquired satellite signals. The time and
date are set automatically based on
the GPS position. To adjust the time
settings, see page 39 .
For more information about GPS, go to
www.garmin.com/aboutGPS .