Garmin montana 600 - Manual (Page 44)

Customizing Your Device
40 Montana 600 Series Owner’s Manual
• Position Format—sets the position
format in which a given location
reading appears.
• Map Datum—sets the coordinate
system on which the map is
structured.
• Map Spheroid—shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.
Heading Settings
You can customize the compass
settings.
Select > Setup > Heading.
• Display—sets the type of
directional heading on the compass.
• North Reference—sets the north
reference of the compass.
• Go To Line/Pointer—allows you
to select how the course appears.
◦ Bearing (Small or Large)—the
direction to your destination.
◦ Course (CDI)—the course
deviation indicator displays
your relationship to a course
line leading to a destination.
• Compass—switches from an
electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time (Auto), or turns the
compass off.
• Calibrate Compass— page 19 .
Altimeter Settings
Select > Setup > Altimeter.
• Auto Calibration—allows the
altimeter to self-calibrate each time
you turn the device on.