Go-Video T2040 - Manual (Page 10)

10
Step 3 - Connect to Antenna/Cable
Connect the TV to your antenna or cable/satellite hookup (or PC) as shown.
Connect to Cable Box or
Satellite Receiver
Connect to Antenna
or Basic Cable
Connect to PC
RF Cable
VGA Cable
IN OUT AUDIO S-VIDEO VIDEO
L R
OUTPUT RF
2 - Getting Started (cont.)
Step 2 - Connect Power Cable
1 Connect the supplied power cable to the AC In jack on the back of the LCD TV.
2 Plug the power cable into a standard AC outlet.
Caution
• Always turn the the LCD TV off when connecting the power cable.
• Always unplug the power cable from the LCD TV and power outlet when not using the
TV for a long period of time.
• The LCD TV has a universal power supply that allows operation with either 100/120V
AC or 220/240VAC voltage. No user-adjustment is required.