Go-Video T2040 - Manual (Page 13)

13
3 - Advanced Settings
Menu System Overview
Press the MENU/ENTER button to view the
five main menu categories:
• PC
• TV
• Video
• OSD
• Audio
Depending on the input you are viewing, one or
more of these options will be dimmed.
PC Settings
If you are using the LCD TV as a PC monitor,
you can use the PC menu to adjust the
brightness, contrast, color, size, and position of
the PC display.
1 Press INPUT until PC appears in the upper
right-hand corner.
• If you do not have a PC connected to
the VGA Input you cannot view the PC
settings menu.
2 Press MENU/ENTER to display the main
menu.
3 Press  /  to select PC and press MENU/
ENTER.
4 Press  /  to select from the following
options:
Brightness
• Press  /  to set the brightness level.
Contrast
• Press  /  to set the contrast level.
Color
Press MENU/ENTER to display the Color
Menu, then press  /  to select from the
following options:
• 6500K/7500K/9300K - Press  /  to
select the desired color temperature.
• User - For a custom color temperature,
press  /  to select the individual RGB
(Red, Green, and Blue) sliders. Then use
 /  to fine tune each color.
Image
Press MENU/ENTER to display the Image
Menu, then press  /  to select from the
following options:
• H-Size - Press  /  to set the width of
the PC display.
• Fine - Press  /  to set the sharpness
of the PC display.
• H-Position - Press  /  to set the
horizontal position (left/right) of the PC
display.
• V-Position - Press  /  to set the
vertical position (up/down) of the PC
display.
• Auto Adjust - Press MENU/ENTER to
automatically adjust the PC display to fit
the screen.
Information
• Displays the resolution (e.g. 640 x 480)
and refresh rate (e.g., 60 Hz) of the PC
display.
Reset
• Restores factory settings.
OSD Audio