GE eKEY User Manual
Page 44
eKEY
User Manual
36
4. Insert the eKEY shell into an AEII KeyBox or point your
PDA at an iBox. Several screens display as the eKEY
application communicates with the KeyBox and releases
the key container.
The AEII KeyBox container will drop after a few seconds. Grasp
the sides of the container and pull straight down to remove it from
the KeyBox. For an iBox, press up on the base of the KeyBox to
release the key container. The iBox container will relock after 30
seconds.
Note:
After releasing the key container of an iBox, your PDA may display
information from the listing agent, including showing notes, listing
details, and the listing agent’s business card.
Use the chain inside the KeyBox key container to attach the
listing keys. The AEII KeyBox container holds up to two listing
keys, and the iBox holds up to three. Before closing the key
container, verify that all items are well inside and that the front is
not bowing or bulging out. If you are a listing agent, always
make sure that you have a spare set of listing keys before you
close the key container.
To close the key container, turn it so that the compartment
holding the keys is facing you. Insert the key container into the
bottom of the KeyBox and push up until it closes.
CAUTION:
Do not place ID tags, key rings, or loose objects in the
key container. They can jam the container.