GE 169202 - Manual (Page 8)

8
OPERATION
Notes Press start/stop button (3) to continue operation and complete the
paused countdown cycle.
The countdown cycle can also be interrupted by pressing
drink button
(10) or salsa button (9).
Press and hold the
timer button (11) for 2 seconds to turn off the timer
mode anytime.
•
•
•
After the countdown cycle is completed, the blender stops operation and switches
to standby mode. The LCD display
(2) blinks blend indicator and default speed 12.
If start/stop button (3) is pressed before the end of the countdown cycle, the blender
stops operation and all indicators and settings are blinking on the LCD display (2).
If no button is pressed after resetting speed or time for 3 minutes, the blender goes
to standby mode, the power ON/OFF button
(1) lights up blue at 25% of its overall
intensity.
If the power ON/OFF button
(1) is pressed within 15 minutes, the LCD display
(2) shows the previously settings. After 15 minutes all settings are deleted and the
blender goes back to normal mode.
Pulse function
Press and hold high pulse button (4) or low pulse button (5) to operate the blender
as long as the button is kept depressed.
The LCD display
(2) blinks pulse and 1 or 2 for the high or low pulse setting. All other
indicators are off.
Release the
high pulse button (4) or low pulse button (5) to stop blending. The
blender goes back to standby mode.
Drink and salsa button
There are two predefined programs, for drink and salsa preparation. Use each to prepare
soft drinks or dip sauce respectively.
Press drink button (10) or salsa button (9). The LCD display (2) blinks and shows
timer information for each mode.
•
•
•
•
•
•
•
•
169202-EN-10.indd 8 6/1/09 1:14:29 PM