GE RM94931 - Manual (Page 10)

Retrieving Codes
If you need to find the three-digit code for your
TV, VCR, DBS Receiver, or Cable Box after your
device is set-up using Code Search, use this
procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release the
device button for the
d e v i c e’s code you are
retrieving . The
I N D I C ATOR LIGHT
will blink once then
remain lit.
3. Press and release
SETUP. The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on the
keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat step 4 until you
have retrieved all three
numbers in the code.
9
94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 10