GE RM94931 - Manual (Page 13)

DBS Menu Function
The DBS Menu is used to navigate thru the
Guide screens, to make changes in the DBS set-
tings such as channel lists, passwords, etc.
Entering the DBS Menu Mode:
1. Push the CBL•SAT
button on the remote.
2. Push the MENU button.
This puts the remote in
DBS Menu Mode. The
DBS Menu should now
be visible on the
television. The
INDICATOR LIGHT will
blink continuously to
indicate the remote is
now in DBS Menu Mode.
While in DBS MENU
these buttons will
function as follows:
VOL UP/DOWN
buttons will operate as
CURSOR RIGHT/LEFT
CH+/- keys will operate as
CURSOR UP/DOWN.
For RCA, GE, and ProScan DBS Systems, push-
ing the MENU button will select the highlighted
item. The numberic buttons may also be used to
select the MENU choice.
Note: Not all functions in competitive models
and brands of DBS systems may be fully sup-
ported.
12
94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 13