Installation – GSI Outdoors PNEG-524 User Manual
Page 10
10
PNEG-524 Roof Exhaust Fan
5. INSTALLATION
24" Roof Fan Mounting and Assembly of Fan, Adaptor and Rain Hood
The roof fans, adaptor and rain hood can be installed in the bin roof sheet before assembling the
roof or after the roof is assembled. The fan is secured by bolts that must be fastened from the
inside of the bin roof, so the assembly should be made before the sidewalls are erected.
1. Assemble the roof sheet mounting template as shown in
Figure 5C 24" Roof Fan Template Placement on the Roof Sheet.
Figure 5D 24" Roof Fan Adaptor and Template Parts Breakdown.
2. Place the roof sheet adaptor mounting template at the appropriate location of the roof fan.
Move the template as far up the roof sheet as possible, but allow for 1" minimum clearance
between the roof sheet rib and bottom of the template on each side.