Disc settings, Initial setup (continued) – GoVideo VR3930 User Manual
Page 24
DV Record Audio
You only need to set DV Record Audio if you have a
digital camcorder with 32kHz/12-bit sound connected to
the front panel DV IN jack. Some digital camcorders
have two stereo tracks for audio. One is recorded at the
time of shooting; the other is for overdubbing after
shooting.
• With the Audio 1 setting, the sound that was record-
ed while shooting is used.
• With the Audio 2 setting, the overdubbed sound is
used.
Auto Chapter
During recording (Video mode only), chapter markers
are added automatically at fixed intervals. You can set
this interval to 3 minutes, 5 minutes or 10 minutes. To
turn off automatic chapter marking, select “Not Use”.
DISC Settings
DISC Initialize
• If you load a blank DVD-R disc, it will always be ini-
tialized in Video mode, which allows the disc to be
played in most standard DVD players.
• If you load a blank DVD-RW disc, you will be prompt-
ed to initialize the disc in Video mode (for maximum
compatibility) or VR mode (to enable advanced edit-
ing features).
• If you load a DVD-RW that has already been used,
you can change between Video mode and VR mode
by erasing the disc using the DISC Initialize feature.
11
Press SETUP.
The Setup menu appears.
2
2
Use v / V to select the Disc option.
3
3
While the Disc option is selected, press B to
move to the second level.
4
4
Use v / V to select the DISC Initialize option.
5
5
Press B to move to the third level.
The Start icon is highlighted.
6
6
Press ENTER.
The DISC Initialize menu appears.
77
Use b / B to select the desired DISC Initialize
Mode (VR Mode or Video Mode) then press
ENTER.
It may take a few minutes to initialize the disc.
Caution
If you change the disc format, everything recorded
on the disc will be erased.
8
8
Press SETUP to exit the menu.
24
Initial Setup (Continued)
Audio 2
Audio 1
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev.
Select
5 Min
10 Min
Not Use
3 Min
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev.
Select
Start
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
EZ Play
My DVD
Prev.
Select
Video Mode
Select mode.
Disc Initialize
VR Mode