Gallien-Krueger NEO SERIES NEO 1001/212 - Manual (Page 4)

4
Neo Series Bass Combo Amplifi er
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Verify Line Voltage and Amperage: Your new
amplifi er has been factory confi gured for use with
the following:
120 Volt/60Hz 15 A circuit for USA/Canada.
230 Volt/50Hz 10 A circuit for UK/Australia.
240 Volt/50Hz 10 A circuit for Europe.
100 Volt/50Hz 15 A circuit for Japan.
220 Volt/50Hz 10 A circuit for Korea.
Verify AC Circuit Capacity Before Use: The high
power output of your amplifi er may require heavy
current draw under full-load conditions. Connecting
the amplifi er to a line with specifi cations other than
indicated above can create a safety or fi re hazard and
may damage the amplifi er. Connecting to the same
circuit used by other heavy-power devices, such
as high-wattage lights, may cause circuit breakers to
trip. It is always a good idea to avoid using any audio
equipment on the same AC circuit as equipment with
motors, such as air conditioners or refrigerators. This
will lessen the possibility of power variation and elec-
trical start-up noise affecting your sound.
AC Power Cord: To avoid safety hazards, use only
the power cord supplied with your unit. If a replacement
cord is needed, make certain to use a standard IEC
compliant cord. Damaged power cords should be
replaced immediately. When setting up, make certain
that the AC plug is easily accessible. If you do not intend
to use the amplifi er for a considerable length of time,
disconnect the plug from the AC Mains Socket.
Earth Grounding Connection: To prevent
electric shock, do not remove the grounding plug
on the power cord, or use any plug or extension
cord that does not have a grounding plug pro-
vided. Make certain that the AC outlet is prop-
erly grounded as well. Do not use a ground-lift
adapter with this product.
Do Not Open the Amplifi er Enclosure: There
are no user-serviceable parts inside this product.
Opening the amplifi er enclosure may present a shock
hazard. Modifi cation to the product will void your
warranty. If liquid enters the unit, or any metal
object such as a paper clip accidentally falls inside
the enclosure, disconnect the unit from the AC power
source immediately and consult an authorized service
station.
Setup: To insure proper operation and to avoid
potential safety hazards, place the unit on a fi rm, level
surface. Do not plug or unplug the instrument or
speaker cable while the amplifi er power is on.
Heat & Ventilation: For proper ventilation, make sure
there is at least 8 inches of clearance on top, sides, front
and rear of the unit. Avoid using in extremely hot
or cold locations and areas that are exposed to direct
sunlight or near heating equipment. Avoid using in
moist or high humidity areas.
Cleaning & Maintenance: Clean only with a dry
cloth. Never use benzene, thinner, alcohol, or other
volatile cleaning agents. Do not use abrasive cleaners,
as they may damage the fi nish of metal parts. Avoid
spraying insecticides near the unit. No other
maintenance should be necessary.
Traveling: If Traveling with the unit frequently, we
recommend a road case or cover to protect it from
scratches and road wear.
Packaging: The carton and packing materials used in
shipping your new amplifi er were specifi cally designed
to cushion it from the shocks and vibration that occur
during transport. We suggest that you save the carton
and packing materials for use in shipping, in the event
you move, or the amplifi er needs repair.
Safety Information