GE CMT-NEZ5 - Manual (Page 21)

Dis
p
la
y/O
p
ti
onal
Comp
onen
ts
21 GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A AUDIO IN jack
Use audio cords (not supplied) to connect an
optional analog component (Portable Audio
Player, etc.) to this jack. You can then record or
listen to the sound from the component through
this system.
Listening to audio from a
connected component
1
Connect the audio cords.
See “Hooking up optional components”.
2
Press FUNCTION repeatedly until “AUDIO
IN” appears.
Start playing the connected component.
Recording audio from a
connected component
1
Connect the audio cords.
2
Start recording manually.
See “Recording on a tape manually” on
page 16.
Notes
• If the connected component has the AVLS
(Automatic Volume Limiter System) function, be
sure to turn off the function when using the
transmitter. Otherwise, you will have to turn up the
volume of the speaker, and that may cause distortion.
• If the connected component has the BASS BOOST
or MEGA BASS function, be sure to turn off the
function when using the transmitter. Otherwise, the
sound from the speaker may be distorted.
Optional Components
Hooking up optional components
Optional analog component
From the audio output
jacks of an optional
analog component
Stereo mini-plug