GE 25210 - Manual (Page 15)

15
Phone Setting
1. Make sure your phone is OFF (not in Talk mode).
2. Press the Menu button on HS or the MENU soft key (left) on BS to go
to the main menu.
3. Press VOL (+ or -) button to scroll to Phone Setting.
4. Press SELECT soft key (right) to confirm and you may program the
following items:
Date/Time (base only),
Auto Answer (handset only),
Auto Answer Intercom (both base and handset),
Dial Mode (base only),
Area Code (base only),
Registration (handset only),
De-Registration (base only),
2nd Call Alert (both base and handset),
Handset Name (handset only),
Update HS List (base only).
Date/Time
From the Phone Setting Menu:
1. Press the
VOL (+ or -) button to scroll to Date/Time.
2. Press SELECT soft key. The screen displays “ Year 2008” .
3. Use the touch-tone pad to enter the last two digits of the current year
(range: 00 to 99).
4. Press SAVE soft key to save the year setting and proceed to date
setting.
5. The screen displays Date “ 01/01”. Use the touch-tone pad to enter two
digits for current month and day respectively (format: mm:dd).
6. Press SAVE soft key to save the month/date setting and proceed to time
setting.
7. The screen displays Time “ 12:00A”. Use the touch-tone pad to enter
four digits for current time and use soft key AM/PM to toggle between
“P” (pm) and “A” (am).
8. Press SAVE soft key to save the setting. The screen displays “Saved”.
NOTE: If you subscribe to Caller ID service, the current Date/Time is set
automatically when you receive your first CID record and will override
manually set Date/Time.
NOTE: The Date/Time setting item only exists in base menu, handset Date/
Time should update automatically after it is set in the base.
Programming the Telephone