GE 25210 - Manual (Page 18)

1
De-Register (Only applicable for base)
From the Phone Setting Menu:
1. Press the
VOL (+ or -) button to scroll to the Deregistration.
2. Press SELECT soft key. The list of all registered handsets will be
displayed, and use the VOL (+ or -) button to scroll to your selection.
3. Press the SELECT soft key. The screen displays “Remove handset?”.
4. Press YES soft key to confirm de-registration. The screen displays
“Saved” and then displays “Press “REG” to initiate registration” in the
handset.
Second Call Alert
If it is set to On, you will hear the alert tone when you are in conversation
and there is an incoming call from another line.
From the Phone Setting Menu:
1. Press the
VOL (+ or -) button to scroll to 2ND Call Alert.
2. Press SELECT soft key. Use the VOL (+ or -) button to scroll to your
selection. The default setting is On.
3. Press SELECT soft key to save your selection and the screen displays
“Saved”.
Handset Name (only applicable for handset)
From the Phone Setting Menu:
1. Press the
VOL (+ or -) button to scroll to the Handset name.
2. Press SELECT soft key. The default name is Handset.
3. Use the touch-tone pad to enter a name (up to 13 characters). More
than one letter is stored in each of the number keys. For example, to
enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3
times for the letter I. Press the 5 key 3 times for the letter L. Press the 5
key 3 times for the second letter L, and press the 1 key to insert a space
between the first and last name. Press the 7 key 4 times for the letter
S; press the 6 key once for the letter M; press the 4 key 3 times for the
letter I; press the 8 key for the letter T; press the 4 key twice for the
letter H.
NOTE: If you make a mistake, press DIR/CID button to move the cursor
forward or backward, and then use the Mute/Del button to backspace and
delete one character at a time.
4. Press the SAVE soft key to save your name. You will hear a confirmation
tone and the screen displays “Saved”.
Update Handset List (only applicable for base)
This function is used to update all registered handsets from the current
handset name list.
Programming the Telephone