GIGABYTE Pentium 4/D Processor Motherboard GA-5EASV-RH - Manual (Page 43)

4 3
BIOS Setup
PCI Device
` PCI IRQ Line 1/2/3/4
When ACPI device cannot use IRQs already in use by ISA or EISA devices. Use ‘Auto
Select’ only if no ISA or EISA legacy cards are installed.
Auto Select Auto selecting PCI IRQ lines. (Default value)
3,4,5,7,9,10,11,12,14,15 Select specify PCI IRQ lines.
Disabled Disable this function..
Wake On LAN / PME
This option allow user to determine the action of the system when a LAN/PME wake up event
occurs.
Enabled Enable Wake On LAN/PME. (Default value)
Disabled Disable this function.
Note: This item must enabled if you’re running under Windows operating system.
Wake On Ring
This option allow user to determine the action of the system power is off and the modem is
ringing.
Enabled Enable Wake On Ring. (Default value)
Disabled Disable this function.
Note: This item must enabled if you’re running under Windows operating system.
Wake On RTC Alarm
When "RTC Alarm Resume" item is set to enabled, system will wakeup from RTC. (This item
will be functionalized under ACPI OS)
Enabled Enable alarm function to POWER ON system.
(Default value)
Disabled Disable this function.
Note: This item must enabled if you’re running under Windows operating system.