English, 8) f_panel (2 x 10 pins connector), 7) pwr_led – GIGABYTE Socket A Processor Motherboard 7VM400AM-RZ User Manual
Page 16
- 16 -
7VM400AM-RZ Motherboard
English
8) F_PANEL (2 x 10 pins Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
SPK (Speaker Connector)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch)
Open: Normal Operation
Close: Reset Hardware System
PW (Power Switch)
Open: Normal Operation
Close: Power On/Off
MSG (Message LED/ Power/ Sleep LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
NC
7) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode.
1
Pin No.
Definition
1
MPD+
2
MPD-
3
MPD-
1
2
19
20
HD-
HD+
RES+
RES-
NC
IDE Hard Disk Active LED
Reset Switch
SPEAK-
MSG-
MSG+
PW
-
PW+
Message LED/
Power/
Sleep LED
Speaker Connector
SPEAK+
1
1
1
1
1
Power
Switch