GIGABYTE Socket A Processor Motherboard 7VM400AM-RZ - Manual (Page 26)

- 26 - 7VM400AM-RZ Motherboard
English
Integrated Peripherals
CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware
Inte grated Periphe rals
OnChi p IDE Cha nnel0 [Enab led]
OnChi p IDE Cha nnel1 [Enab led]
OnChip Serial ATA [Enabled]
SATA Mode [RAID]
AC97 Audio [Au to]
VIA Onboard LAN [Enab led]
USB 1 .1 Contr oller [Enab led]
USB 2 .0 Contr oller [Enab led]
USB K eyboard Su pport [Disa bled]
USB M ouse Sup port [Disa bled]
Onboar d Serial P ort 1 [3F8/ IRQ4]
Onboar d Serial P ort 2 [2F8/ IRQ3]
Onboar d Parallel Port [378/ IRQ7]
Paral lel Port Mode [SPP]
Game Port Add ress [201]
Midi Port Add ress [Disa bled]
x Midi Po rt IRQ 10
higf: M ove Enter: Select +/-/ PU/PD: V alue F10: Save ESC: Exit F1: General Help
F5: P revious V alues F6: Fa il-Safe De fault F7: Optimiz ed Defa ults
Item Help
Menu L evel }
If a hard disk
contr oller ca rd is
used, set at Dis abled
[Enab led]
Enabl e onboar d IDE
chan nel
[Disa bled]
Disab le onboar d IDE
chan nel
OnChip IDE Channel0
When set at "Enabled", it allow s y ou to use the onboard primary PCI IDE. If a hard disk controller
card is used, please set at "Disabled".
Enabled Enable onboard 1st channel IDE port. (Default v alue)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel1
When set at "Enabled", it allow s y ou to use the onboard secondary PCI IDE. If a hard disk controller
card is used, please set at "Disabled".
Enabled Enable onboard 2nd channel IDE port. (Default v alue)
Disabled Disable onboard 2nd channel IDE port.
OnChip Serial ATA A
Enabled Enable onboard VT8237 Serial ATA support. (Default v alue)
Disabled Disabled VT8237 Serial ATA support.
SATA Mode
RAID Selec t SATA chip function as RAID. (Default v alue)
IDE Selec t SATA c hip func tion as IDE.
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default v alue)
Disabled Disable this function.
VIA Onboard LAN
Enabled Enable onboard LAN function. (Default v alue)
Disabled Disable this function.
USB 1.1 Controller
Disable this function if y ou are not using the onboard USB feature.
Enabled Enable USB 1. 1 controller. (Default v alue)
Disabled Disable USB 1. 1 controller.
USB 2.0 Controller
Disable this function if y ou are not using the onboard USB feature.