GE ZGU122N - Manual (Page 20)

Double Access
Doors
24-1/8"
18-1/4"
• Cut the opening to the dimensions shown. Reinforce
the inside of the opening using at least 1" wide
material surround to accept the frame-mounting
screws.
• Place the frame into the opening and secure with
screws (provided) on all sides as shown.
• Hang the doors on the hinges as shown.
NOTE: If you are installing another accessory into
the same enclosure, measure and cut the openings
to accommodate the bottom overlaps and align
them evenly across the bottom.
Double Access
Doors
24-1/8"
18-1/4"
Installation
Instructions
ZX27AD ACCESS DOORS
20
7/8"
Overlap