Greyhound Lines 96155 User Manual
Page 3
Page 3
SKU 96155
for technical questions, please call 1-800-444-3353.
wORk AREA
keep your work area clean and well lit.
1.
Cluttered and dark areas invite acci-
dents.
do not operate the Engine in explosive atmospheres, such as in the presence
2.
of flammable liquids, gases, or dust. Gasoline engines create sparks which may
ignite the dust or fumes.
keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed. Children
should never be allowed in the work area.
PERSONAL SAfETy
Stay alert. watch what you are doing, and use common sense when operat-
1.
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating the
Engine may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. Contain long hair.
2.
keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
do not overreach. keep proper footing and balance at all times.
3.
Proper footing
and balance enables better control of the Engine in unexpected situations.
4.
use safety equipment. Always wear eye protection. Dust mask,
nonskid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions. Always wear ANSI-approved safety goggles
when using or performing maintenance on this Engine.
TOOL uSE ANd CARE
do not force the Engine. use the correct Engine for your application.
1.
The
correct Engine will do the job better and safer at the rate for which it is designed.
Do not force the Engine and do not use the Engine for a purpose for which it is not
intended.
do not use the Engine if the Engine’s Ignition Switch does not turn it on or
2.
off. Any tool that cannot be controlled with the Ignition Switch is dangerous and
must be replaced.
disconnect the Spark Plug wire from the Engine before making any adjust-
3.
ments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Always disconnect the