Generac Power Systems 009592-5 - Manual (Page 35)

Generac ® Power Systems, Inc. 33
Section 6 – Installation
PRIMEPACT 55G and 55LP Recreational Vehicle Generators
6.7.6 POWER SUPPLY CORD
The power supply cord must comply with all applicable
codes, standards and regulations. It must be large
enough to handle the full amperage to which it will be
subjected.
6.7.7 GROUND FAULT CIRCUIT INTERRUPTERS
The National Electrical Code (NFPA 70, 551-7) requires
that you install ground fault circuit interrupters (GFCIs)
on all external and some internal electrical receptacles.
Contact your manufacturer or dealer for recommenda-
tions.
◆ ◆
Figure 6.18 — Transfer Switch Isolation Method
Figure 6.19 — Installation With Isolation Receptacle