Grizzly Industrial 10" Heavy Duty Table Saw Model - Manual (Page 45)

G1023S Series Heavy-Duty 10'' Table Saw -43-
5. Moving the arbor bracket moves the V-belts
and pulleys out of alignment, so adjustment
of the motor pulley is required. Simply loosen
the setscrew in the middle motor groove pul-
ley and slowly slide the pulley towards the
end of the motor shaft. Once the V-belts are
back in alignment, tighten the setscrew
securely.
6. Re-attach the table, making sure there is
adequate blade clearance through all blade
adjustments. Recheck guard alignment to
the blade and to the table top. Adjust as nec-
essary and tighten down all the bolts before
use.
7. If the blade is still contacting the insert,
repeat
Steps 1-6 . Check all other adjust-
ments.
8. Recheck the blade to miter slot adjustments,
and adjust as necessary.