GE EPM9450Q - Manual (Page 145)

137
• Neutral CT Primary and Secondary
Communications
• Baud Rate for Comm 1, 2, and 3.
• Unit ID for Comm 1, 2, and 3.
• Protocol for Comm 1, 2, and 3.
• Mode for Comm 1.
• IP Address, Subnet Mask, and Default Gateway.
The Setup 1 tab also provides push buttons for performing the following commands:
Download – Executes a script to check for values that have changed and downloads
those values to the device via the GE 7700 Gateway.
Refresh – Executes a script to upload all of the meter values for the settings on the
screen.
Note: Be sure to click the Refresh button prior to changing or downloading any
settings to the EPM7500 or EPM7600, as the latest settings may not be displayed.