GE EPM9450Q - Manual (Page 140)

132 PMCS Interface Toolkit
Min/Max Tab
EPM 7500/7600 Meter - Min/Max Tab
The Minimum/Maximum Values tab displays a variety of minimum and maximum
values recorded by the EPM 7500/7600. Select Show Minimum or Show Maximum
buttons to display either the minimum or maximum values for the displayed
parameters. To reset all min/max values, select the Reset Min/Max button.
Min/Max values may be displayed for the following parameters:
Phase A, B, C, Neutral and Average Values
• Vln A, B: n/a when Voltage Mode is DELTA
• Vln C: n/a when Voltage Mode is DELTA or SINGLE
• Vln Avg: n/a when Voltage Mode is DELTA
• Vll AB
• Vll BC, CA, and Avg: n/a when Voltage Mode is SINGLE
• I A, B, Neutral, and Avg
• I C: n/a when Voltage Mode is SINGLE
• Total Harmonic Distortion – Voltage A, B, and C: n/a when Source is n/a.
• Total Harmonic Distortion – Current A, B, C, and Neutral: n/a when Source
is n/a.
• K Factor A, B, C, and Neutral: n/a when Source is n/a.
Three-Phase Values
• Vab, Vbc, Vca
• Power Factor Lead Total: n/a when PF is Lagging
• Power Factor Lag Total: n/a when PF is Leading
• Voltage Unbalance