GE EPM9450Q - Manual (Page 144)

136 PMCS Interface Toolkit
• Status (On, Off) for Status Inputs (SI) 1-8. (Color Code: Green – ON,
Grey – OFF).
• Counters for SI1-8.
The Inputs tab also provides push buttons for performing the following commands:
Reset Counters – Resets Digital Input Status Counters for SI1-8.
The Inputs tab also provides retentive memory inputs for the following:
Digital Input Names for SI1-8.
Setup 1 Tab
EPM 7500/7600 Meter - Setup 1 Tab
The Setup 1 tab displays the following demand values from the EPM 7500/7600.
Power Settings
• Volts Mode
• Phase Order
• Voltage Polarity for A, B, and C
• Current Polarity for A, B, C, and Neutral
Transformer Ratio Settings
• PT and CT Primary
• PT and CT Secondary