GE EPM9450Q - Manual (Page 154)

146 PMCS Interface Toolkit
• Full Scale Setting for AI1-4. : n/a when doesn’t exist on the meter
• Scaled Value for AI1-4. : n/a when doesn’t exist on the meter
The Inputs tab also provides push buttons for performing the following commands:
Reset Counters – Resets Digital Input Status Counters for SI1-8.
The Inputs tab also provides retentive memory inputs for the following:
Digital Input Names for SI1-8.
Analog Input Names for AI1-4. : n/a when doesn’t exist on the meter
Setup 1 Tab
EPM 7700 ION Meter - Setup 1 Tab
The Setup 1 tab displays the following demand values from the EPM 7700.
Power Settings
• Volts Mode
• Phase Order
• Voltage Polarity for A, B, and C
• Current Polarity for A, B, C, and Neutral
Transformer Ratio Settings
• PT and CT Primary
• PT and CT Secondary
• Neutral CT Primary and Secondary