735 feeder relay, Metering tab, 735 f – GE EPM9450Q User Manual
Page 208: Eeder, Elay
Advertising
200
PMCS Interface Toolkit
735 Feeder Relay
The Events and Wave function buttons below the Info box are disabled since the 735
does not support Waveform Capture or Event generation.
The 735 Tabular Data Screen wizard has two command buttons, described below.
Tab
Button
Function
Metering
Reset Device
Issues a RESET command to the 735
Trip
Clear Last Trip Data
Clears the trip causes log
Table 28. 735 Tabular data screen commands.
Metering Tab
The 735 Metering screen shows:
• Current and Output Relays
• Time Overcurrent Trip and Instantaneous Overcurrent Trip
• Configuration
The RESET/CLEAR Device button will issue a RESET command to 735.
Advertising