GE EPM9450Q - Manual (Page 211)

203
SR745 Transformer Management Relay
Under the Info area, the SR745’s function buttons are all enabled.
The SR745 Tabular Data Screen wizard has three command buttons:
Tab Button Function
Metering Reset Device Issues a RESET command to the device
Demand Clear Max
Demand Data Clears the maximum demand data from the
SR745’s memory
Harmonics Clear Loss-of-Life
Data Clears loss-of-life data from the SR745’s
memory
Table 29. SR745 Tabular data screen commands.
See the SR745 Transformer Management Relay Instruction Manual (Chapter 6,
Actual Values) for information on the display of data values under different device
configurations. Values not configured for use are displayed as N/A. When configured
for only 2 Windings, the Winding 3 fields on the Tabular Data wizard are not visible.
Metering Tab
The Multilin SR745 Metering Values screen shows:
• Current
• Sequence Current
• Status Flags
The RESET Device button will issue a RESET command to the device.