GE 49-60612 - Manual (Page 22)

Installation Instructions
REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles – on some models)
Stainless steel (on some models):
REMOVING THE DOOR
HANDLE: Loosen the
set screws with the
3/32 Allen wrench
and remove the
handle. NOTE: For
Double Door models
follow the same
procedure on the
opposite door.
Plastic handle (on some models):
REMOVING THE DOOR HANDLE: Depress the tab on
the underside of the handle and slide the handle up
and off of the mounting fasteners.
REVERSING THE DOOR HANDLE (on some models):
• Remove
the handle
mounting
fasteners with a
1/4 Allen
wrench and
transfer the
handle mounting
fasteners to the
right side.
• Remove the logo
badge.
• Remove and
transfer the
plug button to
the left side of
the fresh food
door. NOTE: Use a flat plastic edge to prevent
damaging the door. Remove any adhesive on the
door with a mild detergent. Remove the paper
covering on the adhesive backing on the logo badge
prior to carefully attaching the badge to the door.
A
A
6
A
B
A
B
Mounting
Fasteners
Mounting
Fasteners
Badge
Badge
(appearance may vary)
(appearance may vary)
REMOVE THE FREEZER DOOR HANDLE
Stainless steel and plastic handles:
Loosen the set screws located on the underside of
the handle with the 1/8 Allen wrench and remove
the handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed use a 1/4 Allen wrench.
A
7
A
22
INSTALLING THE REFRIGERATOR
(cont.)