Grizzly G0442 - Manual (Page 23)

Model g0442/g0601 (Mfg since 3/12)
-21-
assembly
the model g0442/g0601
is a heavy machine.
serious personal injury
may occur if safe moving
methods are not used. to
be safe, get assistance
and use power equip-
ment to move the ship-
ping crate and remove
the machine from the
crate.
to assemble the dust collector:
1. Connect the upper stand legs with the lower
stand braces, using (16) 3 ⁄
8
"-16 x 3 ⁄
4
" hex bolts,
(32) 3 ⁄
8
" flat washers, and (16) 3 ⁄
8
"-16 lock nuts
(see figure 10).
note: Do not fully tighten the fasteners for
now.
figure 10. initial assembly of upper stand legs
connected to lower stand braces.
x 16
2. Attach the upper stand braces to the top of
the assembly from step 1, using (16) 3 ⁄
8
"-16
x 3 ⁄
4
" hex bolts, (32) 3 ⁄
8
" flat washers, and (16)
3 ⁄
8
"-16 lock nuts, as shown in figure 11.
note: Do not fully tighten the fasteners for
now.
figure 11. upper braces attached to stand
assembly.
x 16
3. square up the stand, as shown in figure 12,
then tighten all the bolts.
figure 12. squaring stand assembly before
tightening stand hardware.