Genicom LN45 User Manual
Page 23
Aug 01
Genicom
Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide
1-5
Space requirements
5.
Refer to the cautions below on how to carry the printer. Then, with the assistance of another person,
lift up the printer and place it on the floor.
6.
Relocate the printer to a flat and sturdy surface meeting the
“Location and Environment Precautions”
.
NOTE:
Save the carton and packing materials for later use in case you need to ship the printer at a
later time. It is particularly important that you save the wooden shipping pallet.
WARNING:
1) This printer is very heavy. The weight of the main unit without paper cassette, consum-
ables, and paper is about 106 lbs (48kg). Never attempt to lift the printer by yourself. The
printer should always be carried by two persons.
2) To carry the printer, grasp the four bottom corners from the right and left sides, not
from the front (where the control panel is located) and back sides. Never try to lift the
printer while holding any part other than the bottom corners otherwise there will be a
severe risk of injury if the printer is dropped.
3) When lifting the printer, correct posture is important to prevent injuries.
A
CAUTION: Never attempt to ship your printer without using the wooden pallet. Severe dam-
age may occur.