Interface menu – Genicom LN45 User Manual

Page 90

Advertising
background image

Publication No. GEG-99126

Genicom

Aug 01

4-10

GENICOM LN45 and Intelliprint mL450 User Guide
Interface Menu

Interface Menu

The Interface Menu provides access to the printer interface settings. Use the following procedure to enter
the interface menu:

1.

Press the MENU button on the control panel.

2.

Press the NEXT button until the text “Interface Menu” is shown on the second line of the display.

3.

Press the SELECT button to enter the interface menu.

4.

Press the NEXT button to move through the submenus: Port, Parallel Setup, and Network
Setup

.

5.

Use the procedures in the following table to access and change the printer interface settings:

Submenus

Default
Setting

Available
Settings

Procedure for Changing Setting

Port
This submenu allows you
to enable the type of
interface.

Parallel:
On

Network Card
1:
Off

Parallel:
On, Off

Network Card 1:
On, Off

1. Press NEXT or PREVIOUS to toggle between

PARALLEL and NETWORK CARD 1.

2. Press SELECT to save this setting.

Advertising
This manual is related to the following products: